Mass Spectrometry for Biomedical and Food Analysis.

Biomedical and food analysis has always been an important topic that closely relates to health [...].

High performance liquid chromatography coupled with post - Column derivatization methods in food analysis: Chemistries and applications in the last two decades.

High performance liquid chromatography coupled with post-column derivatization is used for increasing the sensitivity and selectivity of the desirable analytes after the chromatographic separation. The transformation of the analytes can be conducted through the addition of a suitable reagent in the eluted stream or the ultraviolet irradiation of the eluted analytes, forming detectable derivatives for ultraviolet or fluorescence detectors. This review focuses on the developed methods using high performance liquid chromatography coupled with post-column derivatization for the determination of substances in food samples during the last two decades. The significance of the determination of each analyte in foods and the existing guidelines in each case are discussed. Preparation of the samples and the analytical methods are commented. For each analyte, official methods and commercially available systems and reagents are mentioned, as well.

First nanoplate digital PCR method to trace allergenic foods: Improved sensitivity for the detection of sesame.

Sesame (Sesamum indicum L.) is an important allergenic food whose presence can be the cause of severe allergic reactions in sensitised individuals. In this work, nanoplate digital PCR (ndPCR) was used to develop two methods to detect trace amounts of sesame in processed foods and compared with previously proposed real-time PCR assays. Two independent ndPCR approaches were successfully advanced, achieving sensitivities of 5 and 0.1 mg/kg of sesame in dough/biscuits, targeting the CO6b-1 and ITS regions, respectively. The sensitivity using both targets was improved by one order of magnitude comparing with real-time PCR and was not affected by food processing. CO6b-1 system was not influenced by food matrix, exhibiting similar performance regardless the use of complex matrix extracts or serial diluted DNA. Herein, ndPCR was proposed for the first time for the detection of allergenic foods with the advantage of providing better performance than real-time PCR regarding sensitivity and robustness.

Performance assessment of a new G12/A1 antibody-based rapid ELISA using commercially available and gluten-spiked food samples.

OBJECTIVE: Food products with <20 mg/kg gluten can be labeled 'gluten-free' according to international regulations. Several antibodies-based ELISAs have been develop to track gluten traces in food products. Among them, R5 and G12 antibody-based ELISAs are the frequently used methods. However, these antibodies have certain limitations. We evaluated the accuracy of G12/A1 antibody-based 'Glutentox ELISA Rapid G12' and compared the results with the current reference method i.e., R5 antibody-based 'Ridascreen R5 ELISA'. METHODS: In the first step, the performance of Glutentox ELISA Rapid G12 kit was inspected by determination of the threshold value i.e., > or <20 mg/kg gluten in different food products. In the second step, quantification accuracy was assessed by quantification of gluten in gluten-free food products spiked with gliadin reference material. RESULTS: In total 47 food products (naturally and labeled gluten-free, and food with traces of gluten) were included. Of them, 29 products were quantified with <20 mg/kg, and 18 with a low level of gluten by both the kits. Six out of 29 gluten-free products were used for the recovery test at different spike levels. Gluten concentration and mean recovery rates of individual kits showed consistency. CONCLUSION: GlutenTox Rapid G12 ELISA could be an appropriate choice for detecting gluten in food products but needs more in-house validation and collaborative tests.

Spectral data fusion in nondestructive detection of food products: Strategies, recent applications, and future perspectives.

In recent years, the food industry has shown a growing interest in the development of rapid and nondestructive analytical methods. However, the utilization of a solitary nondestructive detection technique offers only a constrained extent of physical or chemical insights regarding the sample under examination. To overcome this limitation, the amalgamation of spectroscopy with data fusion strategies has emerged as a promising approach. This comprehensive review delves into the fundamental principles and merits of low-level, mid-level, and high-level data fusion strategies within the domain of food analysis. Various data fusion techniques encompassing spectra-to-spectra, spectra-to-machine vision, spectra-to-electronic nose, and spectra-to-nuclear magnetic resonance are summarized. Moreover, this review also provides an overview of the latest applications of spectral data fusion techniques (SDFTs) for classification, adulteration, quality evaluation, and contaminant detection within the purview of food safety analysis. It also addresses current challenges and future prospects associated with SDFTs in real-world applications. Despite the extant technical intricacy, the ongoing evolution of online data fusion platforms and the emergence of smartphone-based multi-sensor fusion detection technology augur well for the pragmatic realization of SDFTs, endowing them with formidable capabilities for both qualitative and quantitative analysis in the realm of food analysis.

Determination of copper in rose tea samples using flame atomic absorption spectrometry after emulsification liquid-liquid microextraction.

Rose tea infusion has gained popularity worldwide due to its health benefits. However, it is known that tea plants can be contaminated with heavy metals including copper. Hence, an accurate and applicable analytical method namely emulsification liquid-liquid microextraction based deep eutectic solvent - flame atomic absorption spectrometry (ELLME-DES-FAAS) was proposed to determine copper at trace levels in rose tea samples. Under the optimum experimental conditions, analytical figures of merit for the developed method were examined, and dynamic range, limit of detection (LOD) and limit of quantification (LOQ) were found to be 5.07-246.61 µg/kg (mass-based) with 0.9992 coefficient of determination, 2.50 µg/kg and 8.32 µg/kg, respectively. A matrix matching calibration strategy was employed to boost recovery results, and the acceptable recovery results were recorded between 95.9 % and 118.4 %. According to recovery results, the developed analytical method can be safely employed to determine the concentration of copper in rose tea samples accurately.

Current applications and future trends of artificial senses in fish freshness determination: A review.

Fish is a highly demanding food product and the determination of fish freshness is crucial as it is a fundamental factor in fish quality. Therefore, the fishery industry has been working on developing rapid fish freshness determination methods to monitor freshness levels. Artificial senses that mimic human senses are developed as convenient emerging technologies for fish freshness determination. Computer vision, electronic nose (e-nose), and electronic tongue (e-tongue) are the emerging artificial senses for fish freshness determination. This review article is uniquely worked upon to investigate the current applications of the artificial senses in fish freshness determination while describing the steps, and fundamental principles behind each artificial sense, comparing them with their advantages and limitations, and future trends related to fish freshness determination. Among the artificial senses, computer vision determines the freshness of fish in a completely nondestructive way while the e-tongue determines the freshness of fish in a completely destructive way. There are developed e-noses for fish freshness determination in both destructive and nondestructive ways. By analyzing visual cues such as color, computer vision systems can assess fish quality without the need for physical contact and it makes computer vision suitable for large-scale industrial fish quality assessing applications. Overall, this review study reveals artificial senses as a proven replacement for traditional sensory panels in determining fish freshness precisely and conveniently. As future trends, there is a demand for developing applications for consumers to determine fish freshness based on artificial senses.

Development and validation of sensitive and rapid CRISPR/Cas12-based PCR method to detect hazelnut in unlabeled products.

Hazelnut, one of the most popular tree nuts, is widely found in processed food and even very small amounts can trigger severe allergic reactions in susceptible people. Herein, we developed a sensitive and rapid method based on CRISPR and qPCR capable of detecting low-abundance hazelnut in processed food. The assay, known as CRISPR-based nucleic acid test method (Crinac) can detect 1 % of hazelnut in a mixture and allows the species to be identified in a complex processed sample. The detection process can be completed within 60 min. Contributed to amplification via PCR and CRISPR/Cas12a, enables end-fluorescence measurement for the quantification of hazelnut, thus reducing assay time and eliminating the need for costly real-time fluorescence PCR instruments. The assay based on CRISPR/Cas12 and PCR has potential as a sensitive and reliable analytical tool for the detection of food authenticity.

In-house validation of an LC-MS method for the multiplexed quantitative determination of total allergenic food in chocolate.

Mass spectrometry has been widely accepted as a confirmatory tool for the sensitive detection of undeclared presence of allergenic ingredients. Multiple methods have been developed so far, achieving different levels of sensitivity and robustness, still lacking harmonization of the analytical validation and impairing comparability of results. In this investigation, a quantitative method has been validated in-house for the determination of six allergenic ingredients (cow's milk, hen's egg, peanut, soybean, hazelnut, and almond) in a chocolate-based matrix. The latter has been produced in a food pilot plant to provide a real and well-characterized matrix for proper assessment of method performance characteristics according to official guidelines. In particular, recent considerations issued by the European Committee for Standardization have been followed to guide a rigorous single-laboratory validation and to feature the main method performance, such as selectivity, linearity, and sensitivity. Synthetic surrogates of the peptide markers have been used both in native and labelled forms in matrix-matched calibration curves as external calibrants and internal standards, respectively. A two-order of magnitude range was investigated, focusing on the low concentration range for proper assessment of the detection and quantification limits (LOD and LOQ) by rigorous calibration approach. Conversion factors for all six allergenic ingredients have been determined for the first time to report the final quantitative information as fraction of total allergenic food protein (TAFP) per mass of food (µgTAFP/gfood), since such a reporting unit is exploitable in allergenic risk assessment plans. The method achieved good sensitivity with LOD values ranging between 0.08 and 0.2 µgTAFP/gfood, for all ingredients besides egg and soybean, whose quantitative markers reported a slightly higher limit (1.1 and 1.2 µgTAFP/gfood, respectively). Different samples of chocolate bar incurred at four defined concentration levels close to the currently available threshold doses have been analyzed to test the quantitative performance of the analytical method, with a proper estimate of the measurement uncertainty from different sources of variability. The sensitivity achieved resulted in compliance with the various threshold doses issued or recommended worldwide.

Capillary electromigration methods for food analysis and Foodomics: Advances and applications in the period March 2021 to March 2023.

This work presents a revision of the main applications of capillary electromigration (CE) methods in food analysis and Foodomics. Papers that were published during the period March 2021 to March 2023 are included. The work shows the multiple CE methods that have been developed and applied to analyze different types of molecules in foods and beverages. Namely, CE methods have been applied to analyze amino acids, biogenic amines, heterocyclic amines, peptides, proteins, phenols, polyphenols, pigments, lipids, carbohydrates, vitamins, DNAs, contaminants, toxins, pesticides, additives, residues, small organic and inorganic compounds, and other minor compounds. In addition, new CE procedures to perform chiral separation and for evaluating the effects of food processing as well as the last developments of microchip CE and new applications in Foodomics will be also discussed. The new procedures of CE to investigate food quality and safety, nutritional value, storage, and bioactivity are also included in the present review work.

Quantification of Total Sulfite in Shrimps by BIOFISH 300 SUL Method: First Action 2021.09.

BACKGROUND: Sulfite is the oldest and most widely used additive in our food supply with antioxidant and preservative properties. Due to its allergenic-like reactions and other adverse health effects, its use is regulated by international regulatory bodies. Therefore, food industries as well as regulatory laboratories must ensure that the maximum concentration of sulfite permitted is not exceeded. The AOAC INTERNATIONAL-approved official method for the quantification of sulfites is the Optimized Monier-Williams Method (AOAC Official Method 990.28), which consists of a time-consuming titration. OBJECTIVE: The present study aims to demonstrate the reliability of the BIOFISH 300 SUL, a simple, fast, and accurate method, as an alternative, for the quantification of total sulfites in shrimp, with a lower LOQ than that of the OMA 990.28, set at 10 mg/Kg. METHODS: The BIOFISH 300 SUL method is a highly specific biosensor based on its proprietary enzyme-based electrode, for the rapid quantification of total sulfite. The test kit consists of an electrochemical reader (biosensor BIOFISH 300) and disposable electrodes (Biotest) that are capable of providing an electrical signal proportional to the amount of sulfite in the sample analyzed. The method mainly consists of the extraction of sulfite from the solid matrix in an aqueous solution, and its subsequent quantification by the device in less than 3 min. RESULTS: Comparative studies between BIOFISH 300 SUL and OMA 990.28 were conducted for naturally contaminated and spiked samples of raw and boiled shrimp with sulfite levels covering the 7-150 mg/kg range in order to determine linearity, recovery, repeatability, intermediate reproducibility, and accuracy. CONCLUSION: The BIOFISH 300 SUL method demonstrated high accuracy and precision for the whole range of quantification (7-150 mg/kg). Its ease of use and fast response make it the ideal technology to be implemented by the industry. HIGHLIGHTS: BIOFISH 300 SUL was adopted as a First Action Official MethodSM by the AOAC Expert Review Panel for Sulfites in Seafood Methods in February 2021 after rigorous review.

Nondestructive Metabolomic Fingerprinting: FTIR, NIR and Raman Spectroscopy in Food Screening.

In recent years, there has been renewed interest in the maintenance of food quality and food safety on the basis of metabolomic fingerprinting using vibrational spectroscopy combined with multivariate chemometrics. Nontargeted spectroscopy techniques such as FTIR, NIR and Raman can provide fingerprint information for metabolomic constituents in agricultural products, natural products and foods in a high-throughput, cost-effective and rapid way. In the current review, we tried to explain the capabilities of FTIR, NIR and Raman spectroscopy techniques combined with multivariate analysis for metabolic fingerprinting and profiling. Previous contributions highlighted the considerable potential of these analytical techniques for the detection and quantification of key constituents, such as aromatic amino acids, peptides, aromatic acids, carotenoids, alcohols, terpenoids and flavonoids in the food matrices. Additionally, promising results were obtained for the identification and characterization of different microorganism species such as fungus, bacterial strains and yeasts using these techniques combined with supervised and unsupervised pattern recognition techniques. In conclusion, this review summarized the cutting-edge applications of FTIR, NIR and Raman spectroscopy techniques equipped with multivariate statistics for food analysis and foodomics in the context of metabolomic fingerprinting and profiling.

Application of Sorbent-Based Extraction Techniques in Food Analysis.

This review presents an outline of the application of the most popular sorbent-based methods in food analysis. Solid-phase extraction (SPE) is discussed based on the analyses of lipids, mycotoxins, pesticide residues, processing contaminants and flavor compounds, whereas solid-phase microextraction (SPME) is discussed having volatile and flavor compounds but also processing contaminants in mind. Apart from these two most popular methods, other techniques, such as stir bar sorptive extraction (SBSE), molecularly imprinted polymers (MIPs), high-capacity sorbent extraction (HCSE), and needle-trap devices (NTD), are outlined. Additionally, novel forms of sorbent-based extraction methods such as thin-film solid-phase microextraction (TF-SPME) are presented. The utility and challenges related to these techniques are discussed in this review. Finally, the directions and need for future studies are addressed.

Oilomics: An important branch of foodomics dealing with oil science and technology.

Oil is one of three nutritious elements. The application of omics techniques in the field of oil science and technology is attracted increasing attention. Oilomics, which emerged as an important branch of foodomics, has been widely used in various aspects of oil science and technology. However, there are currently no articles systematically reviewing the application of oilomics. This paper aims to provide a critical overview of the advantages and value of oilomics technology compared to traditional techniques in various aspects of oil science and technology, including oil nutrition, oil processing, oil quality, safety, and traceability. Moreover, this article intends to review major issues in oilomics and give a comprehensive, critical overview of the current state of the art, future challenges and trends in oilomics, with a view to promoting the optimal application and development of oilomics technology in oil science and technology.

Food allergen detection by mass spectrometry: From common to novel protein ingredients.

Food allergens are molecules, mainly proteins, that trigger immune responses in susceptible individuals upon consumption even when they would otherwise be harmless. Symptoms of a food allergy can range from mild to acute; this last effect is a severe and potentially life-threatening reaction. The European Union (EU) has identified 14 common food allergens, but new allergens are likely to emerge with constantly changing food habits. Mass spectrometry (MS) is a promising alternative to traditional antibody-based assays for quantifying multiple allergenic proteins in complex matrices with high sensitivity and selectivity. Here, the main allergenic proteins and the advantages and drawbacks of some MS acquisition protocols, such as multiple reaction monitoring (MRM) and data-dependent analysis (DDA) for identifying and quantifying common allergenic proteins in processed foodstuffs are summarized. Sections dedicated to novel foods like microalgae and insects as new sources of allergenic proteins are included, emphasizing the significance of establishing stable marker peptides and validated methods using database searches. The discussion involves the in-silico digestion of allergenic proteins, providing insights into their potential impact on immunogenicity. Finally, case studies focussing on microalgae highlight the value of MS as an effective analytical tool for ensuring regulatory compliance throughout the food control chain.

Analysis of Aminoglycoside Antibiotics: A Challenge in Food Control.

Aminoglycosides are a widely used group of antibiotics in veterinary medicine. However, misuse and abuse of these drugs can lead to residues in the edible tissues of animals. Due to the toxicity of aminoglycosides and the exposure of consumers to the emergence of drug resistance, new methods are being sought to determine aminoglycosides in food. The method presented in this manuscript describes the determination of twelve aminoglycosides (streptomycin, dihydrostreptomycin, spectinomycin, neomycin, gentamicin, hygromycin, paromomycin, kanamycin, tobramycin, amikacin, apramycin, and sisomycin) in thirteen matrices (muscle, kidney, liver, fat, sausages, shrimps, fish honey, milk, eggs, whey powder, sour cream, and curd). Aminoglycosides were isolated from samples with extraction buffer (10 mM NH4OOCH3, 0.4 mM Na2EDTA, 1% NaCl, 2% TCA). For the clean-up purpose, HLB cartridges were used. Analysis was performed using ultra-high-performance liquid chromatography coupled with tandem mass spectrometry (UHPLC-MS/MS) with a Poroshell analytical column and a mobile phase of acetonitrile and heptafluorobutyric acid. The method was validated according to Commission Regulation (EU) 2021/808 requirements. Good performance characteristics were obtained for recovery, linearity, precision, specificity, and decision limits (CCα). This simple and high-sensitivity method can determine multi-aminoglycosides in various food samples for confirmatory analysis.

Measurement of Dietary Fiber: Which AOAC Official Method of AnalysisSM to Use.

A broad range of AOAC Official Methods of AnalysisSM (OMA) have been developed and approved for the measurement of dietary fiber (DF) and DF components since the adoption of the Prosky method (OMA 985.29). OMA 985.29 and other OMA were developed to support the Trowell definition of DF. However, these methods do not measure DF as defined by the "new," physiologically relevant, Codex Alimentarius definition. Methodology to support the Codex definition has been developed and updated in recent years. In this article, the relevance of each OMA in supporting the Codex definition of DF is described and suggestions are presented on the most appropriate method, together with proposals for changes in title and application statements for the "historic" OMA methods.

Nondestructive rainbow trout (Oncorhynchus mykiss) freshness estimation by using an affordable open-ended coaxial technique.

In the present work, a nondestructive device set up for a rapid and reliable freshness assessment of rainbow trout during 10 days of storage in ice was evaluated. The device was characterized by a vector network analyzer interfaced with an open coaxial probe to be placed in contact with the fish eye. The acquisition of the reflected scattering parameter (S11), which is the ratio between the amplitude of the reflected and the incident signal, was assessed in the 50 kHz-3 GHz spectral range. S11 is composed of a real part and an imaginary part, and both parts were used to predict quality index method for freshness evaluations. Partial least squares regression predictive models of the demerit scores related to fish eye attributes (eye pupil and eye shape) and the day of storage were set up. The main results showed that both the real and imaginary parts of the S11 decrease as a function of storage time. The combination with multivariate analysis allowed to set up predictive models of the storage time and the demerit scores with R2 values up to 0.946 (root mean square error [RMSE] = 0.88 days) and 0.942 (RMSE = 3.17 demerit scores related to the fish eyes attributes), respectively (external validation). According to our results, the proposed cheap solution appears a useful tool for the freshness assessment of rainbow trout. PRACTICAL APPLICATION: This work shows that dielectric properties have the potential to discriminate stored fish according to their freshness quality. A device based on this principle can play a significant role in the postharvest processes, contributing to higher product quality and safety and supporting producers and retailers during the qualitative inspections.

Modern automated microextraction procedures for bioanalytical, environmental, and food analyses.

Sample preparation frequently is considered the most critical stage of the analytical workflow. It affects the analytical throughput and costs; moreover, it is the primary source of error and possible sample contamination. To increase efficiency, productivity, and reliability, while minimizing costs and environmental impacts, miniaturization and automation of sample preparation are necessary. Nowadays, several types of liquid-phase and solid-phase microextractions are available, as well as different automatization strategies. Thus, this review summarizes recent developments in automated microextractions coupled with liquid chromatography, from 2016 to 2022. Therefore, outstanding technologies and their main outcomes, as well as miniaturization and automation of sample preparation, are critically analyzed. Focus is given to main microextraction automation strategies, such as flow techniques, robotic systems, and column-switching approaches, reviewing their applications to the determination of small organic molecules in biological, environmental, and food/beverage samples.